mga sir my problem po ako gumugana na po ang configuration na ginagwa ko ang
problem ko kung mag connect na po sya nag error
ang error po error loading directory
gamit ko po na client is coreftp
ito ang sample activity log ng core ftp pag nag connect ako

Welcome to Core FTP, release ver 2.1, build 1568 (U) -- © 2003-2008
WinSock 2.0
Mem -- 1,045,604 KB, Virt -- 2,097,024 KB
Started on Thursday July 10, 2008 at 12:54:PM
Connect socket #448 to 81.150.215.189, port 21...
220 Welcome to DATAHOLD FTP Service.
AUTH SSL
234 Proceed with negotiation.
TLSv1, cipher TLSv1/SSLv3 (DES-CBC3-SHA) - 168 bit
USER LCMGLOBAL
331 Please specify the password.
PASS **********
230 Login successful.
SYST
215 UNIX Type: L8
Keep alive off...
PWD
257 "/"
PBSZ 0
200 PBSZ set to 0.
PROT P
200 PROT now Private.
PASV
227 Entering Passive Mode (192,168,168,252,196,223)
192.168.168.252 -> 81.150.215.189
LIST
Connect socket #524 to 81.150.215.189, port 50399...
timeout
QUIT
Connect socket #472 to 81.150.215.189, port 21...
220 Welcome to DATAHOLD FTP Service.
AUTH SSL
234 Proceed with negotiation.
TLSv1, cipher TLSv1/SSLv3 (DES-CBC3-SHA) - 168 bit
USER LCMGLOBAL
331 Please specify the password.
PASS **********
230 Login successful.
SYST
215 UNIX Type: L8
Keep alive off...
Attemping Active mode transfer...
PBSZ 0
200 PBSZ set to 0.
PROT P
200 PROT now Private.
PORT 10,1,1,253,78,78
500 Illegal PORT command.
PORT command failed
Error loading directory...

SAMPLE CONFIG of my SSL/TLS+VSFTP
#ftp_username=
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
#
# Run standalone? vsftpd can run either from an inetd or as a standalone
# daemon started from an initscript.
listen=YES
#
# Run standalone with IPv6?
# Like the listen parameter, except vsftpd will listen on an IPv6 socket
# instead of an IPv4 one. This parameter and the listen parameter are mutually
# exclusive.
#listen_ipv6=YES
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
#anonymous_enable=YES
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=NO
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=NO
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
data_connection_timeout=160
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
ftpd_banner=Welcome to DATAHOLD FTP Service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
dirlist_enable=YES
#
# You may restrict local users to their home directories. See the FAQ for
# the possible risks in this before using chroot_local_user or
# chroot_list_enable below.
chroot_local_user=YES
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
#
# Debian customization
#
# Some of vsftpd's settings don't fit the Debian filesystem layout by
# default. These settings are more Debian-friendly.
#
# This option should be the name of a directory which is empty. Also, the
# directory should not be writable by the ftp user. This directory is used
# as a secure chroot() jail at times vsftpd does not require filesystem
# access.
secure_chroot_dir=/var/run/vsftpd
#
# This string is the name of the PAM service vsftpd will use.
pam_service_name=vsftpd
#
# This option specifies the location of the RSA certificate to use for SSL
# encrypted connections.
#rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
# This option specifies the location of the RSA key to use for SSL
# encrypted connections.
#rsa_private_key_file=/etc/ssl/certs/private/ssl-cert-snakeoil.key
syslog_enable=YES
pasv_enable=YES
pasv_max_port=51000
pasv_min_port=50000
port_enable=YES
#pasv_promiscuous=YES
tcp_wrappers=NO
#force_dot_files=YES
hide_ids=YES
#max_per_ip=50
#max_clients=50
ssl_enable=YES
allow_anon_ssl=NO
force_local_data_ssl=YES
#force_local_logins_ssl=YES
ssl_tlsv1=YES
ssl_sslv2=NO
ssl_sslv3=NO
rsa_cert_file=/etc/vsftpd.pem
rsa_private_key_file=/etc/vsftpd.pem
:::::::::::::::::::
maraming salamat po...in advance